WIKA CPH6400 Betriebsanleitung Seite 30

6. Commissioning, operation
The USB interface is deactivated by switching off the CPH6400. In order to activate the
USB interface once again, follow the process described above.
GB
Return to the standard measuring mode by pressing the FUNC key several
FUNC
times.
6.8.3 Data source for Data logger (LOGGER SOURCE)
Via the FUNC key various configurations can be achieved, e.g. the data source for the
data logger can be selected.
Activating the Data Source for Data Logger menu item (LOGGER SOURCE)
Pressing the FUNC key three times* (directly within the measuring mode).
* If you already are in a FUNC menu item, press the FUNC key until the "LOGGER SOURCE" menu item
appears.
In the "LOGGER SOURCE" FUNC menu item, the data source for the data logger can
be selected. Via the MODE key pressure "PREAS" is selected, and via the UNIT key
temperature "TEMP" is selected.
Return to the standard measuring mode by pressing the FUNC key several
FUNC
times.
30
The WIKA "PrintCal" PC-Software is available as calibration and evalua-
tion software.
WIKA operating instructions, model CPH6400