Software Upgrades - Radiodetection rd7000+ Bedienungsanleitung

Regularly check your equipment using eCert; this automatic validation test ensures the
equipment is valid according to its original factory calibration.
NOTE: Service by non-approved service centers or operators may void the
manufacturer's warranty.
Radiodetection products, including this guide, are under continuous development and are
subject to change without notice. Go to www.radiodetection.com or contact your local
Radiodetection representative for the latest information regarding the RD7000+ locator
or any Radiodetection product.
RD Manager
The RD Manager is the RD7000+ locator system PC companion and it allows you to
manage and customize your locator. It also allows software upgrades to both the locator
and transmitter.
You can use RD Manager to register your products to obtain 2 years extended warranty,
setup your locator by performing a number of maintenance tasks such adjusting date
and time, activating and de-activating active frequencies or RF markers, or by setting-up
functions like CALSafe or StrikeAlert.
RD Manager is also used to retrieve and analyze internal logged data (PLM and TLM
only).
RD Manager is compatible with PCs running Microsoft Windows XP, Vista, Windows 7
and Windows 8.
For more information about RD Manager refer to its operation manual.
To obtain RD Manager:
1. Go to www.radiodetection.com/RDManager.
2. Follow the instructions.

Software Upgrades

From time to time, Radiodetection may release software upgrades to enhance features
and improve performance of the RD7000+ locator or transmitter.
Software upgrades are free of charge.
You can check if your products are up-to-date or upgrade them by using the RD Manager
software upgrade screen. Refer to its operation manual for further information.
E-mail alerts and notification of new software releases are sent to all registered users.
NOTE: To be able upgrade your products software you need to have created an
account using RD Manager and you need a live internet connection. An optional
special PSU adaptor may be required to update your transmitter software.
23