Radiodetection rd7000+ Bedienungsanleitung Seite 11

• CAL: Displays the date of original factory calibration and the most recent service
calibration or eCert calibration validation.
• MARKR: Enable or disable individual utility markers.
• LANG: Select menus language.
• POWER: Select power frequency: 50 or 60Hz.
• ANT: Enable or disable any antenna mode with the exception of Peak.
• FREQ: Enable or disable individual frequencies.
• ALERT: Enable or disable StrikeAlert
• BATT: Set battery type: ALK, NiMH or Li-ION.
• COMP: Enable or disable display of the Compass feature.
To navigate the locator menu:
1. Press the key to enter the menu.
2. Use the or
3. Press the key to enter the option's submenu.
4. Use the or
5. Press the key to confirm a selection and return to the previous menu.
6. Press the key to return to the main operation screen.
Transmitter menu options
• VOL: Adjust the speaker volume from 0 (mute) to 3 (loudest).
• FREQ: Enable or disable individual frequencies.
• BOOST: Boost transmitter output for a specified period of time (in minutes).
• LANG: Select menus language.
• OPT F: Enable or disable SideStepauto
• BATT: Set battery type: ALK, NiMH or Li-ION – Also select Eco mode for alkaline
batteries only.
• MAX P: Allow the transmitter to output its maximum wattage.
• MODEL: Specify the model of your locator.
• MAX V: Set the output voltage.
• BT: Enable, disable or pair Bluetooth connections to a RD8000 locator (Bluetooth
models only).
To navigate the transmitter menu:
1. Press the key to enter the menu.
2. Use the or
3. Press the key to enter the option's submenu.
4. Use the or
.
™
keys to scroll through the menu options.
keys to scroll through the submenu options.
keys to scroll through the menu options.
keys to scroll through the submenu options.
.
™
11