Troubleshooting - Radiodetection rd7000+ Bedienungsanleitung

5. Press the key to enter the PAIR menu.
6. Scroll up or down to the BT-PC option.
7. Press the key and the locator will attempt to pair with your PDA.
On your PDA:
8. From the PDA's Start menu, select Settings then select the Connections Tab
followed by the Bluetooth icon.
9. Ensure the Bluetooth radio is switched on and make the PDA visible to other devices.
10. Select the Devices tab and scan for new partnerships.
11. Create a partnership with the RD7M_xxx device.
12. If asked for a passkey, enter 1234.
13. Select the COM Ports tab and make a New Outgoing Port with the RD7000+
locator. Note the port number of the selected COM port.

Troubleshooting

Successful wireless communication depends on a number of factors including:
battery life, electromagnetic interference, device memory and physical obstructions.
Ensure that the RD7000+ locator and any other wireless device is sufficiently charged
for wireless communication. Note that many PDAs will suspend wireless connections
when their battery capacity drops below a threshold percentage. Consult your device's
documentation for more information.
Excessive electromagnetic interference can effectively limit the range of wireless
communication and / or corrupt data.
Your PDA device may have insufficient memory to maintain a wireless link, particularly if
the connection is sustained over an hour or longer. Make sure you quit applications on
your PDA using the method described in your device's documentation.
Resetting connections
If you experience problems with the RD7000+ wireless Bluetooth technology features,
Radiodetection recommends resetting the connection and then pairing your device again:
1. Press the key to enter the menu.
2. Scroll to the BT menu using the
3. Press the key to enter the BT menu.
4. Scroll up or down to the RESET menu.
5. Press the key and the locator will purge all current connections.
6. Re-pair your devices.
or keys.
18