Technical Specifications - Siemens Simatic mv220 Betriebsanleitung

Technical specifications

Technical specifications
Criterion
General technical specifications
Dimensions (HxWxD) in mm
Weight in g
Degree of protection
Temperature range
Voltages, currents, potentials
Load voltage L+
Electrical isolation
U (rated voltage)
rated
I (rated current)
rated
Data for inputs
Rated voltage
Input current
Voltage range
Input delay
Input characteristics
Data for the outputs
Output voltage for "1" signal
Output current for "1" signal
• Rated value
Short-circuit at the outputs
26
Operating Instructions, 10/2005 Edition, J31069-D1287-U001-A5-7418
Values
113 x 35 x 90
430
IP65
0°C to 45°C
20.4 V-28.8 V DC (including ripple),
with reverse polarity protection
none
24 V
0.8 A
24 V
7 mA typical
Signal 1 15 to 30 V
Signal 0 -3 to 5 V
3 ms typical (input TRG 0.1 ms)
IEC1131 Type 1
L+ (–0.8 V)
500 mA (outputs OK, N_OK)
100 mA (outputs TRG OUT, DIAG)
20 mA (RDY)
Yes, electronic
SIMATIC MV220