NEC MultiSync LCD300 Bedienungsanleitung Seite 8

Introduction to the NEC MultiSync LCD
translates into energy savings, environmental protection, reduced
emissions and reduced air conditioning costs of the work environment.
The MultiSync LCD
Association (VESA) approved power-down signaling method. Endorsed
by the EPA, VESA's Display Power Management Signaling (DPMS)
method is the power-down process a system should use to communicate
to the monitor to save power. Power-down functions can be utilized
only with an Energy Star system or display card which adheres to the
VESA DPMS standard. By using the monitor's horizontal and vertical
SYNC signals, the monitor can be prompted into the different IPM
modes. The following is the description of the LED indicator for the
IPM power-saving modes:
Mode
ON
Standby & Suspend
Power Switch OFF
ErgoDesign Features
The MultiSync LCD
philosophy that adapts technology to the way you work, increasing
productivity through enhancements in comfort and ease of use.
ErgoDesign features include a low glare screen treatment, power and
brightness controls that are positioned within easy reach, easy-to-use
digital controls and a tilt base that easily adjusts to each individual's
preferred angle of vision.
Reduced Emissions
Incorporating NEC's own Reduced Magnetic Field technology, the
MultiSync LCD
300
strictest international magnetic field, alternating electric field and
electrostatic guidelines.
monitor follows the Video Electronics Standard
300
LED Indicator
Green
Amber
No Light
monitor utilizes NEC's ErgoDesign features
300
monitor has minimal field emissions and follows the
300
Power Consumption
Typical: 40 watts
Typical: less than 8 watts
No Power Used
E - 3