Vacuum Cleaning - Dirt Devil M7110 Bedienungsanleitung

02_M7110_gb.book Seite 28 Freitag, 10. Oktober 2008 10:17 10
3 Operation

3.3 Vacuum cleaning

10
11
12
28
1. Attach the desired nozzle
Chapter 2.3, "Using further nozzles (accessories)".
2. Pull out the cord by the plug up to the yellow mark
(Fig. 10/1).
WARNING:
Danger of electric shock! If the red marking (Fig. 10/2) is
visible, retract the cord by pressing the cord retracting
button (Fig. 11/2) to pull in the cord up to the yellow mark
again. Otherwise the cord might break.
3. Insert the plug into a mains socket.
4. Switch on the cylinder vacuum cleaner with the on/off
switch (Fig. 11/1).
5. Set the nozzle switch to "carpet" or "hard floor" (Fig. 12)
according to the floor to be cleaned:
- Hard floor (Fig. 12/a)
Laminate, tiles, PVC, etc.
- Carpet (Fig. 12/b)
Short- and deep-pile carpets, rugs, etc.
6. When working with the cylinder vacuum cleaner, pull if
after you like a sleigh.
Chapter 2.2, "Assembly" or