Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Preparatory work
Getting to know the appliance
Fig.
:
dust bin cover;
1
1
tion hose connection;
4
OFF button;
parking bracket;
6
cord;
exhaust filter cover;
8
ton;
dust bin handle;
10
suction hose;
suction hose connection;
13
14
cessory bracket;
furniture brush;
16
switchable floor nozzle;
18
catch;
telescopic tube
20
Accessories (optional):
parquet brush;
mini turbo nozzle
A
B
Unpacking and assembling
Check that the unpackaged contents are com-
1
plete. If you notice any transport damage or if an-
ything is missing, contact your dealer immediate-
ly.
Connect suction hose and appliance (Fig.
2
Connect the suction hose with the telescopic tube
3
and adjust the length of the telescopic tube (Fig.
Connect telescopic tube and switchable floor noz-
4
zle (Fig.
).
Ensure that the bypass vent (Fig.
4
5
is completely closed.
Using the accessories
CAUTION!
For hard floors, only use the switchable floor noz-
zle with the brush (Fig.
floor may otherwise become damaged.
CAUTION!
If using the turbo nozzle, make sure that the
surface can withstand the rotating brush without
becoming damaged.
NOTE:
You can also use the suction nozzles without the
telescopic tube as necessary. To do so, connect
the required accessories directly to the handle
(Fig.
).
9
Connect the required accessory to the handle or
1
the telescopic tube (Fig.
accessory is securely connected. ➔ The appliance
can be connected.
dust bin;
suc-
2
3
dust bin release;
ON/
5
connection
7
cord rewind but-
9
bypass vent;
handle;
11
12
15
crevice nozzle;
17
telescopic tube release
19
2
1
) extended, as the hard
10
9
).
Make sure that the
2
EN
Connecting the appliance
CAUTION!
If the red marking is visible (Fig.
the connection cord by pressing the cord rewind
button to pull in the cord up to the yellow mark
(Fig.
6
/
) (Fig.
2
ac-
cord might be damaged.
Pull the cable out of the appliance (Fig.
1
sert the plug into a mains socket.
Vacuum cleaning
Flexible vacuum-cleaning
Connect the required accessories >"Using the ac-
1
cessories" on page 17.
>"Connecting the appliance" on page 17.
on the appliance, press the ON/OFF button (Fig.
).
➔ The appliance starts vacuuming.
with the appliance, pull it after you like a sleigh.
).
3
switch off the appliance, press the ON/OFF button
). ➔ The appliance switches off.
again (Fig.
8
/
)
11
Regulating the suction power
With the suction power controller (Fig.
adjust the suction power to the surface to be
cleaned:
• min. position: for curtains, drapes and the like
• middle position: for hard floors without joints and
crevices
• max. position: for carpets and hard floors with
joints and crevices
Storing the appliance
NOTE:
If necessary, use the accessories mount (Fig.
to attach 2 accessories.
Switch off the appliance and pull the plug from the
1
socket.
Push the cord rewind button until the cord
2
has been fully rewound (Fig.
copic floor nozzle or parquet nozzle (connected to
the telescopic tube or handle) in the parking bracket
(Fig.
).
12
/
), retract
6
1
7
). Otherwise, the connection
Connect the appliance
2
3
When working
4
) you can
8
7
).
Hang the teles-
3
17
).
In-
5
2
To switch
).
8
To
5
/
)
1
15
Werbung
Inhaltsverzeichnis
Fehlerbehebung
