Leckey Squiggles Bedienungsanleitung Seite 23

Trunk harness
With your small or medium trunk harness,
you will receive four connecting straps and
brackets, bolts, washers and locking nuts. Fix
the connecting straps to the backrest before
attaching the trunk harness. To attach the
connecting straps in the shoulder area, slide
the bracket into the slot and set at the desired
height using the bolts and washers provided.
The remaining two side connecting straps are
attached to the two receiving holes, one on
either side of the backrest. Simply attach the
trunk harness to the connecting straps (A, B &
C) on the left and right hand side of the child.
Lateral support padded
cushions
To attach the lateral support padded
cushions, simply slide the cushions on with
the padded side towards the inside of the
seat. Sleeve the plastic buckle (A) through the
slot in the cover. Then bring the two velcro
fastener straps around the bottom of the
moulding and attach them to the velcro panel
as shown.Close over the flap (B).
A
B