Placing The Unit; Overhead Rigging; Connecting The Power Adapter - EuroLite BW-100 Bedienungsanleitung

Placing the unit

• Remove all packing materials from the shipping box. Make sure that there are no packing remnants at the
bubble wheel.
• Only place the machine on flat, scratch- and water-resistant surfaces.
• Keep a minimum distance of 20 cm around and above the device.
• Position the output of bubbles away from people.
• All fog machines develop condensation around the output nozzle.
• Please consider that liquid may be spilt during operation around the machine.

Overhead rigging

Risk of injury caused by falling objects
Devices in overhead installations may cause severe injuries when crashing down. Make sure that the
device is installed securely and cannot fall down. The installation must be carried out by a specialist
who is familiar with the hazards and the relevant regulations.
If necessary, you can suspend the device from a wall or ceiling with a mounting bracket. It can also be fastened to
a truss using an appropriate clamp. Use mounting materials that are compatible with the fastening surface and
capable of bearing the weight of the device. Be sure the device remains in a level position to avoid accidental
leaking.
Notes
• The installation of the device has to be built and constructed in a way that it can hold ten times the weight for
one hour without any harming deformation.
• The device must be additionally secured with e.g. an appropriate safety bond. Pull the safety bond through the
safety eyelet and fasten it in such a way that, in the event of a fall, the maximum drop distance of the device will
not exceed 20 cm. This secondary safety attachment must be constructed in a way that no part of the installation
can fall down if the main attachment fails.
• The safety bonds, quick links, shackles and the carbines must be sufficiently dimensioned and used correctly in
accordance with the latest industrial safety regulations.
• After installation, this product requires inspections periodically to prevent the possibility of rot, deformation and
looseness.

Connecting the power adapter

Connect the power adapter provided to the jack 12 V and to a mains socket (100-240 V AC, 50/60 Hz).
WARNING!
14 • EN