pH 340
Serielle Schnittstelle
Seriellen Ausgang des Meß-
gerätes mit seriellem Anschluß
PC/Drucker verbinden.
PC:
Kabel AK 340/B,
Best.-Nr. 902 841
Drucker: Kabel AK 325/S,
Best.-Nr. 902 837
Die Ein-/Ausgabe wird
automatisch auf RS 232 umge-
schaltet.
Belegung:
1 CTS
2 Steckercodierung + RxD
3 Masse
4 TxD
Verbinden von 2 und 3 und
Anschluß eines PC/Drucker
aktiviert die serielle Ausgabe.
Übertragungsdaten am PC/Drucker
einstellen.
Baudrate:
Parität (nur PC):
Handshake:
Datenbits (nur PC): 8
Stopbit (nur PC):
Sparschaltung:
Das Gerät schaltet ca. 1 h nach der
letzten Tastenbetätigung automatisch ab.
Ausnahme:
Dauerbetrieb an PC oder Drucker bei
angeschlossenem Schnittstellenkabel
und aktivierter zeitgesteuerter Ausgabe.
Die Konfiguration der seriellen
Schnittstelle (Baudrate, zeitgesteuerte
Übertragung, Übertragung auf Tasten-
druck) entnehmen Sie dem Kapitel
"Konfiguration".
40
1200, 2400,
4800, 9600 wählbar
keine
RTS/CTS + Xon/Xoff
1
Datenübertragung
Data transmission
Serial interface
Connect serial ouput of the meter
to serial connection of the
PC/printer.
PC:
Printer: Cable AK 325/S,
The input/output is
automatically switched over
to RS 232.
Connections:
2
1
1 CTS
4
3
2 Plug codification + RxD
3 Mass
4 TxD
Connecting 2 and 3 and
connection of a PC/printer
activates the serial output.
Set transmission data at the PC/printer:
Baud rate:
Parität (PC only):
Handshake:
Data bits (PC only): 8
Stop bit (PC only): 1
Economy circuit:
The meter automatically switches itself off
approx. 1 h after the last key operation.
Exception:
Continuous operation on PC or printer
with connected interface cable and
activated timed output.
For setup of the serial interface (Baud
rate, timed transmission, transmission on
keypressing) please refer to chapter
"Setup".
Cable AK 340/B,
Order no. 902 841
Order no. 902 837
1200, 2400,
4800, 9600 selectable
none
RTS/CTS + Xon/Xoff