15.2 BS115
15.2.1 Select the saw blade speed
The saw blade is driven via a belt drive. Adjust the saw blade speed at the material to be cut.
Motor pulley
Select the feed according to the following table.
Material
Stainless Steel
Stainless Steel ®
Tool steel
Alloy steel
Bearing bronze
Structural steel
iron
mild steel
Thomas steel
Brass
Aluminium
Similar materials
Unscrew the screw on the lid and the lid up.
Loosen the two screws on the motor mount.
The belt is now positioned to the corresponding position of the table
(also in the lid visible).
Tighten the two screws on the motor bracket and close the cover and
screw.
HOLZMANN MASCHINEN GmbH
speed
(m/min)
Motor pulley
20
29
50
Knob screw or tapping screw
www.holzmann-maschinen.at
Drive pulley
Belt position
Drive pulley
A
D
B
E
C
F
OPERATION
Saw band
Bi-Metal
Bi-Metal
HSS
46
BS115 / BS128HDR