Bs128Hdr - Holzmann BS 115 Betriebsanleitung

ASSEMBLY
20. Install the stop.
 Slide the guide bar in the socket and tighten the set screw.
 Install the adapter over the leadership of round steel

14.2 BS128HDR

The BS 128HDR assembled ready in principle.
You only need to assemble the undercarriage.
To mount the first wheels.
After that, the base must be assembled (fitting in with the chassis).
In the end, the band saw is placed on the base and fastened with screws.
Screw the suspension
The spring bracket is screwed as shown on the console
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 42
BS115 / BS128HDR