Operation - Renkforce 1208073 Bedienungsanleitung

Operating instructions
Digital alarm clock
Item no. 1208073
Intended use
The digital alarm clock is used to display the date and time as well as the indoor temperature.
The digital alarm clock has a dual alarm and the display can be changed to show the
temperature in °Celsius or °Fahrenheit. It also has a time zone function to adapt the time to
different time zones. Changing from winter to summer time can also be simplified.
The manufacturer shall not be responsible for inaccurate display or measured values and
their consequences.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If
you use the product for purposes other than those described above, the product may be
damaged. In addition, improper use can cause hazards such as short circuiting, fire, electric
shock etc. Read the instructions carefully and keep them. Make this product available to
third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Digital alarm clock
• Operating instructions
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on proper
handling in this manual, we assume no liability for any resulting personal injury
or damage to property. Such cases will invalidate the warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts,
high humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation
and protect it from any accidental use. Safe operation can no longer be
guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low
height can damage the product.
• Do not open/dismantle the product (except for inserting/changing the batteries
as described in the instructions).
• It is intended for indoor use only. Do not use it outdoors. Contact with moisture,
e.g. in bathrooms, must be avoided under all circumstances.
• Use the product only in temperate climates, not in tropical climates.
• Never use the product when it has just been brought from a cold room to a
warm room. The resulting condensation could destroy the product. Always
allow the product to first reach room temperature before it is connected and
used. This could possibly take several hours.
• In schools, educational facilities, hobby and DIY workshops, the product is to
be operated under the responsible supervision of qualified personnel.
• Correct polarity must be observed while inserting the (rechargeable) batteries.
• (Rechargeable) batteries should be removed from the device if it is not used
for a long period of time to avoid damage through leaking. Leaking or damaged
(rechargeable) batteries might cause acid burns when in contact with skin, ,
therefore use suitable protective gloves to handle corrupted (rechargeable)
batteries.
• (Rechargeable) batteries must be kept out of reach of children. Do not leave
(rechargeable) batteries lying around, as there is risk, that children or pets
swallow them.
• All (rechargeable) batteries should be replaced at the same time. Mixing old
and new (rechargeable) batteries in the device can lead to (rechargeable)
battery leakage and device damage.
• (Rechargeable) batteries must not be dismantled, short-circuited or thrown into
fire. Never recharge non-rechargeable batteries. There is a risk of explosion!
• Do not use batteries along with accumulators (rechargeable batteries).
• Consult an expert when in doubt about operation, safety or connection of the
device.
• Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Operating elements
1 2 3 4 5
MON MON MON MON MON MON TUE TUE TUE TUE TUE TUE WED WED WED WED WED WED THU THU THU THU THU THU
1 1 1 1 1 1 2 2 2 2 2 2
zZ zZ zZ zZ zZ zZ zZ zZ zZ zZ zZ zZ
Z Z Z Z Z Z
Front side
1 Time
2 Snooze function symbol
3 Wake-up alarm symbols 1 and 2
4 SNOOZE/LIGHT button
(snooze function/light)
5 Day of the week display

Operation

a) Insert batteries
1. Remove the battery compartment cover (12) on the rear side of the digital alarm clock.
2. Insert three 1.5 V/DC batteries of type AAA/Micro (not included) with correct polarity into
the battery compartment of the digital alarm clock (observe plus/+ and minus/-).
3. Close the battery compartment.
In principle the digital alarm clock can be operated with rechargeable batteries.
Due to lower voltage (rechargeable battery = 1.2 V, battery = 1.5 V) and lower
capacity of rechargeable batteries, the operating time is shorter than with
batteries. If you wish to use rechargeable batteries in spite of these limitations, it
is imperative that you use special NiMH rechargeable batteries with low self-
discharge. We recommend that you preferably use high quality alkaline batteries
to ensure long and safe operation.
b) Setting up and mounting
The digital alarm clock can be set up on a horizontal, stable, sufficiently large surface using
the fold-out stand. A suitable mat should be used to prevent scratch marks on valuable
furniture surfaces.
Setting
a) Time and date setting
1. Keep the MODE button (7) pressed until the time zone digits flash.
2. Press the UP button (8) or the DOWN button (9) to change the time zone setting. Press the
MODE button to confirm a setting. The hour digits flash.
3. Press the UP button or DOWN button to change the hour setting. Press the MODE button
to confirm a setting. The minute digits flash.
4. Press the UP button or DOWN button to change the minute setting. Press the MODE
button to confirm a setting. The year digits flash.
5. Press the UP button or DOWN button to change the year setting. Press the MODE button
to confirm a setting. The month digits flash.
6. Press the UP button or DOWN button to change the month setting. Press the MODE
button to confirm a setting. The day digits flash.
7. Press the UP button or DOWN button to change the day setting. Press the MODE button
to confirm a setting. The digital alarm clock returns to the normal display.
The display of the year is also possible in setting mode as described above.
b) Alarm setting
1. Press the ALARM button (11) to change to the setting mode of alarm 1.
2. Keep the ALARM button pressed until the hour digits flash.
3. Press the UP button (8) or the DOWN button (9) to change the hour setting. Press the
ALARM button to confirm the setting. The minute digits flash.
4. Press the UP button or DOWN button to change the minute setting. Press the ALARM
button to confirm the setting. Repeated alarm flashes.
5. Press the UP button or DOWN button to change the alarm repeat. Press the ALARM
button to confirm the setting. You now exit the setting mode.
6 7 8 9 1011
SNOOZE MODE UP DOWN
FRI FRI FRI FRI FRI FRI SAT SAT SAT SAT SAT SAT SUN SUN SUN SUN SUN SUN
12
Rear side
6 SNOOZE button (snooze function)
7 MODE button (settings)
8 UP button
2
1
9 DOWN button
10 C/F button (Celsius/Fahrenheit)
11 ALARM button (wake-up alarm)
12 Battery compartment cover
C/F ALARM