Operation - Renkforce 1341714 Bedienungsanleitung

G Operating instructions
Bluetooth Vibrating Alarm Clock
®
Item no. 1341714
Intended use
The product is designed as a wireless alarm clock. The product can be operated and programmed
using Bluetooth 4.0 on an iOS-compatible device (e.g., iPhone, iPad; not included). The product
®
is powered by batteries.
Always observe the safety instructions and all other information included in these operating in-
structions.
Any use other than that described above could lead to damage to this product and involves the risk
of short circuits, fire, electric shock, etc.
This product complies with the applicable national and European requirements. All names of com-
panies and products are the trademarks of the respective owners. All rights reserved.
Package contents
• Vibrating alarm clock
• Operating instructions
Explanation of symbols
This symbol points to specific risks associated with handling, operation or use.
The "arrow" symbol points to special tips and operating information.
Safety instructions
T he warranty will be void in the event of damage caused by failure to observe these
safety instructions! We do not assume any liability for any resulting damage!
W e do not assume any liability for material and personal damage caused by improper
use or non-compliance with the safety instructions. In such cases, the warranty will
be null and void.
• Unauthorised conversion and/or modification of the product is not allowed for safety
and approval reasons (CE).
• The product is not a toy and does not belong in the hands of children!
• The product may be used in dry, enclosed indoor areas only; it must not get damp or
wet.
• The product must not be exposed to extreme temperatures, strong vibrations or
heavy mechanical stress.
• Do not leave packaging material carelessly lying around, as it could become a dan-
gerous plaything for children.
• If you have any questions that are not answered in these operating instructions,
please contact our technical department or another specialist.
Battery/rechargeable battery instructions
• Batteries/rechargeable batteries must be kept out of the reach of children.
• Do not leave batteries/rechargeable batteries lying around in the open. There is a risk of batter-
ies being swallowed by children or pets. If they are swallowed, consult a doctor immediately.
• Skin exposure to the acid of a leaking or damaged single-use/rechargeable battery can burn
your skin, therefore use suitable protective gloves.
• Liquids leaking from batteries/rechargeable batteries are very chemically aggressive. Objects
or surfaces coming into contact with these liquids could be considerably damaged. Thus, store
batteries/rechargeable batteries in a suitable location.
• Normal/rechargeable batteries must not be short-circuited, opened or thrown into a fire. There
is a risk of explosion!
• Do not recharge normal, non-rechargeable batteries; there is a risk of explosion!
• Always use non-rechargeable or rechargeable batteries of the same type.
• Never mix normal batteries with rechargeable batteries.
• Do not mix batteries with different charges (e.g., fully charged and half-discharged non-re-
chargeable or rechargeable batteries).
• Always replace the complete set of batteries/rechargeable batteries.
• Check that the polarity is correct when inserting the batteries/rechargeable batteries (pay at-
tention to plus/+ and minus/-).
Inserting and replacing batteries
• Open the battery compartment on the bottom side by sliding the
cover of the battery compartment in the direction of the arrow.
• Insert three Micro/AAA type batteries, with the correct polarity
(observe Plus/+ and Minus/-). After that, the vibrating alarm emits a
brief vibrating and audio signal.
If you wish to use rechargeable batteries please note
that, due to the lower output voltage (batteries = 1.5 V,
rechargeable batteries = 1.2 V), the operating time will de-
crease.
Therefore, we recommend that you use high-quality alka-
line batteries to operate the vibrating alarm clock in order
to ensure long-lasting and reliable operation.
• Then, put the cover on so that it snaps in.
• The batteries need to be changed if a message is indicating that the
batteries are empty is displayed in the app.
Controls
1 Button for snooze and control LED
2 "ALARM" button
3 "RESET" button
4 "PAIR" button
Downloading the app
Start the Apple AppStore or Google Play Store and download the "BleAlarm" app.
The app is compatible with all smartphones and tablets that are equipped with Blue-
tooth 4.0, for example, iPhone 4S or higher.
®
If you are using an iPad, you may switch to the AppStore to display the iPhone apps in
the search mode (top left display "iPhone only" instead of "iPad only"); otherwise, the
app is not found.
When using an Android device, at least Android 4.3 is required as operating system for
the app to be displayed and downloadable in the Play Store.
Connecting the vibrating alarm clock to your smartphone/tablet
Both devices must be paired with each other for the vibrating alarm clock to work with the app
("pairing" - or coupling process in Bluetooth
Proceed as follows:
• Make sure that the Bluetooth function is activated on your smartphone/tablet.
®
• Start the "BleAlarm" app.
• In the home screen of the app, no paired devices will be displayed when you start for the first
time. Touch the lower button to pair a new device. A message then appears indicating that the
pairing button on the vibrating alarm clock should be pressed for 5 seconds.
Hold down the "PAIR" button on the bottom of the vibrating alarm clock for 5 seconds; a beep is
audible and the LED on the top is flashing rapidly in blue. The pairing procedure is activated.
You will find a new vibrating alarm clock in the app; if you touch the corresponding button of
the app the pairing process will complete. The LED on the alarm clock now flashes 1x every
6 seconds in blue.
The pairing must be done correctly; otherwise, the vibrating alarm clock cannot be
used.
Up to 5 vibrating alarms can be simultaneously controlled via the app.
Note that a vibrating alarm clock can be paired with only one smartphone/tablet. There-
fore, it is not possible to control a vibrating alarm clock by multiple smartphones/tab-
lets.
• After completing the pairing process, the time, date and the available alarm and timer settings
are synced. In addition, the app displays the battery status of the vibrating alarm clock.

Operation

Renaming the vibrating alarm clock
Tap the name of the vibrating alarm clock
in the app ("vibrating alarm" in default set-
ting), and you can now change the name, if
desired.
).
®