Coitech 92107L Bedienungsanleitung Seite 9

Making crosscuts with blade tilted at 0°-45°
This mitre saw is capable of cutting at a tilt angle of 0–45°.
1. Undo the lock (14) and tilt the blade to the desired angle with the help of the bevel scale (16).
2. Tighten the locking knob (14) to lock the bevel angle.
3. Cut as described above.
Precision adjustment of 0° and 45° angles
1. Undo the locking knob (14) and angle
the saw to 0°.
2. Check the angle between the blade and the
turntable using a 90° angle guide.
3. Adjust the end stop using the adjustment
screw (25) by slackening the nut and turning
the screw. Lock the screw again afterwards
by re-tightening the nut.
4. To adjust the 45° end stop, do as above but
use the adjustment screw (26) and a 45°
angle guide.
10 16
25 10
9
26 10
14 10