Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Wear suitable clothing.
•
Do not wear loose-fitting clothing or jewellery; they could be caught in moving parts.
•
Non-slip shoes are recommended for outdoor work.
•
Wear a hairnet or similar if you have long hair.
Always use safetywear.
•
Wear safety glasses.
•
Use a dust mask or dust filter when working in dusty environments.
Use dust extractors.
•
If the tool is equipped with or connected to a dust extractor/collector, make sure that it is turned on
and used correctly.
Do not abuse the lead.
•
Do not jerk the lead, grip the plug itself when disconnecting the power. Make sure that the mains lead
does not come into contact with heat, oil, or sharp edges.
Firmly secure the workpiece.
•
If possible use vices or clamps to hold the workpiece in place. This is much safer than holding
the workpiece in one hand.
Do not overreach.
•
Make sure that you stand steady and balanced all times.
Look after you tools.
•
Make sure that they are clean and that the edges are sharp for maximum effect and best results.
•
Follow the manuals recommendations regarding lubrication and replacement of accessories.
•
Inspect the mains lead regularly. If it is damaged it should be replaced by a qualified service technician.
•
Inspect all leads and cables regularly to check for any damage.
•
Make sure that the machine's handles and controls are clean, dry and free from oil and grease.
Turn the power off.
•
Pull out the plug and push in the emergency stop button before servicing or changing any blades, drill bits,
cutters or sanding discs.
Remove all spanners and repair tools.
•
Make a habit of checking to make sure that the machine is free of all spanners and tools
before turning the power on.
Avoid accidental starts.
•
Do not walk around with your finger on the trigger of a power tool if it is plugged in. Make sure
that the on/off switch is set to OFF before plugging in any power tool.
Use the correct extension leads.
•
If you use extension leads outdoors, only use those designed for outdoor use. Only use extension leads
with thick enough diameter core wires and roll out the whole lead.
Use common sense and be careful.
•
Think before carrying out any task, so that it is carried out safely. Never operate machines/power tools
when you are tired or under the influence of medicine.
Check the following before turning the tool on:
•
That all guards and other parts are whole and in working order.
•
That moving parts are free and correctly aligned.
•
That no moving parts can get caught.
•
That there are no visible defects.
•
Other factors that can influence work execution.
Use only recommended accessories.
•
The use of non-recommended accessories can cause accidents and personal injury.
Should only be repaired by a qualified technician.
•
This tool conforms to current safety requirements.
•
Repairs to the tool should only be carried out by a tradesman using original spares; otherwise the tool could
cause accidents and personal injury.
4
Werbung
Inhaltsverzeichnis
