Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Additional safety rules for compound mitre saws
•
Never use cracked or damaged saw blades.
•
Replace the kerf plate when it is worn.
•
Use only saw blades recommended by the manufacturer.
•
Never use blades made of high speed steel (HSS).
•
Select the correct blade for the material to be cut.
•
Never saw material other than that for which the saw blade is intended.
•
Observe the maximum speed marked on the saw blade.
•
When moving the mitre saw, hold it by the handle.
•
Do not operate the machine without the guard in position, or if the guard does not function
or is not maintained properly.
•
Keep the surrounding work area free of loose chips and offcuts.
•
Use only those spacers and spindle adaptors approved for your saw.
•
If the laser is fitted with a laser, it must not be replaced by a different type. If damaged, have
the laser repaired by the manufacturer or an authorised repair agent.
•
Do not remove any offcuts or jammed material from around the blade area until the blade has stopped.
•
Before sawing, make sure that the saw is stable and secure. When possible, always mount
the machine to a bench.
•
When sawing, always secure the workpiece using clamps or a vice if possible.
•
Use a table, roller stand, or similar to support long workpieces.
In spite of the application of the relevant safety rules and the implementation of safety
devices, certain residual risks cannot be avoided. The following hazards are inherent to the
use of mitre saws:
•
Contact with uncovered parts of the rotating saw blade.
•
Contact with rotating saw blade (cuts).
•
Workpiece or parts of it can be ejected back towards the user (kickback).
•
Shattered saw blade.
•
Flying metal particles if the carbide tips break off.
•
Impairment of hearing if ear defenders are not worn.
•
Health hazards caused by breathing dust in poorly ventilated work areas.
Safety symbol guide
Read the entire operations manual.
Read the entire operations manual and
attempt to understand how
the machine works.
Use ear plug!
There is a risk of impaired hearing.
Always use ear plugs when operating
the machine.
!
Use protective eyeglasses!
Protect your eyes from flying
debris and use protective
eyeglasses or a visor.
!
Use protective shoes!
Use protective shoes with a steel toe
!
that protect against falling objects.
!
Keep visitors away from
the proximity of the machine!
Keep children, pets, and spectators
a minimum of 5 metres away from
the risk zone of the machine.
Caution: Be attentive, keep your hands
away from the proximity of the saw blade!
There is a risk of injury during contact with
rotating saw blade, also at a low speed.
!
Do not use the help of assistants,
unless necessary!
It is prohibited for people other than the
machine operator to be present in the risk
zone of the machine.
!
Turn off the machine and unplug it from the
!
power source before cleaning and service!
!
5
Werbung
Inhaltsverzeichnis
