Technical data
Motor
Rated power
No-load speed
Saw blade, tungsten carbide tipped
Number of teeth
Saw blade bevel tilt
Mitre angles
Table
Max workpiece size at 90°
Max workpiece size at 45°
Max workpiece at 2 × 45°
(double mitre cut)
Laser
Package contents
•
Clamp
•
Spanner
•
Dust bag
•
Support (2 ×)
•
Instruction manual
Before operating the machine
•
The machine must be firmly mounted to a bench or stand.
•
All covers and safety devices have to be properly fitted before the machine is switched on.
•
The saw blade must be able to turn freely in all positions.
•
When working with wood that has been used before, watch out for foreign bodies such as screws or nails.
•
Before switching the machine on, make sure that the saw blade is correctly fitted and that all moving parts
run smoothly.
•
Before connecting the machine to the power supply, make sure that the data on the rating plate is the same
as that of your mains power.
230 V AC, 50 Hz
1800 W
4800 rpm
Ø 210 × Ø 30 × 2.6 mm
24 T
0° - 45° to the left
45° / 0° / 60°
500 × 160 mm
305 × 65 mm
210 × 65 mm
210 × 43 mm
Class 2 according to EN 60825-1
P = < 1 mW, λ = 650 nm
7