Operation - Bio Green Phoenix 2.8 Gebrauchsanweisung

Aircirculation Heater Phoenix 2.8

6. Operation

Connect the heating apparatus to any 230 V ~ 50/60 Hz AC socket. The PHOENIX air circulation
heater has two selector switches and a thermostat. Using the selector switches, you may select one of
the 8 possible operating modes. Set the desired greenhouse temperature on the thermostat (control
range 0-26 ° C). An integral lamp signals heating operation.
Selector 2
Thermostat:
The thermostat setting can be continuously adjusted in a linear range 0 – 26 ° C. This means that the
increasing numbers represent increasing temperature in steps of approx. 2.6 ° C.
Example: Number
0
1
2
3
On/Off lamp
Temperature
≈ 0 ° C
≈ 2.6 ° C
≈ 5.2 ° C
≈ 7.8 ° C etc.
14
Selector 1 Thermostat