General; Symbol Assertion; Safety Instructions; Environmental Aspects - E+E Elektronik EE375 series Bedienungsanleitung

1.

GENERAL

®
E+E Elektronik
industrial applications.
All available know how has been invested into the development, construction and
production of this instrument.
This manual is a part of the scope of supply and to warrant proper handling and optimal
performance of the instrument it should be read before start-up.
In addition, the manual is for everyone who requires knowledge about transport, setup,
operation, maintenance and repair.
The manual should not be used without written consent from E+E Elektronik
purpose of competition or forwarded to third parties. Copies for personal use are
permitted.
All information, technical data and illustrations contained in these instructions are based
on information available at the time of publication.
1.1

Symbol assertion

This symbol indicates a safety instruction.
!
These safety instructions should always be followed carefully. By not following these
instructions injuries of persons or material damage could happen.
Therefore E+E Elektronik
i
This symbol indicates a note.
These notes should be followed to achieve optimum functioning of the equipment.
1.2

Safety instructions

General Safety Instructions
• Take care when unscrewing the filter cap as the sensor element could be damaged.
• The sensor is an Electro Static Discharge sensitive component (ESD).
When touching the sensor element, ESD protective measures should be followed.
• Installation, electrical connection, maintenance and commissioning should be
accomplished by qualified personnel only.
• Arbitrary modifications of the product lead to the loss of all warranty claims. This may
be accomplished only with an explicit permission of E+E Elektronik
• The devices are constructed for the operation of separated extra-low voltage (SELV).
1.3

Environmental aspects

Products from E+E Elektronik
issues. While disposing of the product environmental pollution should be avoided.
To dispose of the transmitter the individual components should be sorted with care.
The housing consists of metal (aluminium, Al Si 9 Cu 3). The electronic parts should be
collected as electronic scrap and disposed of according to the regulations in force.
has developed this instrument for the exact dewpoint monitoring in
®
does not accept liability.
!
®
are developed considering all important environmental
®
!
10
®
for the