Geutebruck VIPCAM-GNSD882 Installationsanleitung Seite 99

5) Fix the Indoor Mount Kit to the straight tube with the supplied screws and
washers.
6) Take out the Lock Screw
Plate from the small bag in the Indoor
Mount Kit's package and attach it to
the dome back plate, as shown in the
picture.
7) Fix the plate onto the dome back with
the small screw, as marked in the
figure.
Connect the cables to the dome camera.
Mount the dome camera to the Indoor
Mount Kit. (Ensure the dome camera is
fixed completely, and the thread holes on
the Lock Screw Plate and Indoor Mount
Kit are aligned.) Afterwards, screw the
supplied standard screw / security screw,
as shown in the picture 3
23