Geutebruck VIPCAM-GNSD882 Installationsanleitung Seite 140

CRUISE LINE
Select a cruise line that the Dome Camera should execute when an alarm pin
is triggered. The cruise line(s) should be defined prior either in the CRUISE
setup menu or via joystick.
• DWELL TIME
DWELL TIME means the duration of executing an alarm action. If the
PRESET mode is selected, the dome camera wiII go to the selected preset
position and stay there for a user-defined period of time
(1~127seconds/always) when alarm takes place. If other modes
(SEQUENCE/AUTOPAN/CRUISE) have been selected, the camera wiII keep
executing the selected mode (DWELL TIME: ALWAYS) until alarm condition
is released or users rotate the joystick to change the status of the dome
camera.
NOTE: The dwell time is only adjustable when selecting Preset for alarm
action. When the dwell time is up, the dome camera wilI go back to its
trigger position and recheck alarm pin status.
• EXIT
Exit the ALARM SETTING menu and go back to the <MAIN PAGE 3 to carry
on setup of Alarm Detect.
MAIN PAGE 3
IR FUNCTION
ALARM SETTING
ALARM DETECT
WDR FUNCTION
PRIVACY MASK
TIME SETTING
SCHEDULE
EXIT OSD
AUTO
ENTER
OFF
OFF
ENTER
ENTER
ENTER
YES
64