Geutebruck VIPCAM-GNSD882 Installationsanleitung Seite 143

H/V SIZE
Adjust the frame size via changing H/V size value using the joystick right/left.
MODE
Assign a trigger action for a motion detection frame. Options include PRESET,
SEQUENCE, AUTOPAN and CRUISE. When motion is detected within a
frame, the dome camera wiII execute the set trigger action.
DWELL TIME
The DWELL TIME is duration of executing a trigger action. If select the
PRESET mode, when motion is detected, the dome camera wiII go to the
selected preset position and stay there for a user-defined period of time (1-
127 seconds/always). If select other modes (SEQUENCE/AUTOPAN/
CRUISE), the dome camera wiII keep executing the selected mode (DWELL
TIME: ALWAYS) untiI it is interrupted by commands sent from a connected
control device.
EXIT
Exit the FRAME setting page and go back to ALARM DETECT main page.
• FRAME DISABLE
Select a frame to be cancelled and press <ENTER>. The selected frame wiII
then be removed from the monitored field.
• THRESHOLD
The threshold range is adjustable from 1-255. The smaller the value, the more
sensitive it is; i.e. 1: highest sensitivity; 255: lowest sensitivity.
• EXIT
Exit the ALARM DETECT menu and go back to the <MAIN PAGE 3 to carry
on setup of WDR function
MAIN PAGE 3
IR FUNCTION
ALARM SETTING
ALARM DETECT
WDR FUNCTION
PRIVACY MASK
TIME SETTING
SCHEDULE
EXIT OSD
(see 3.3.20 - WDR FUNCTION).
AUTO
ENTER
OFF
OFF
ENTER
ENTER
ENTER
YES
67