Geutebruck VIPCAM-GNSD882 Installationsanleitung Seite 145

The available area for setting a privacy mask is restricted within tiIt angle 70
degrees. Maximum 8 masks can be displayed in one scene. All the settings
are described as the following:
PRIVACY MASK MENU
PRIVACY SWITCH
TRANSPARENCY
COLOR
SET MASK
CLEAR MASK
EXIT
• PRIVACY SWITCH
Users can enable or disable the PRIVACY MASK function through this item.
Set this item to <ON> before configuring mask zones.
• TRANSPARENCY
The color of privacy masks can be set as transparent. Select <ON> to display
transparent masks (use only for easier setting!).
• COLOR
The color of privacy masks can be set through this item. The available colors
are black, HI/LO gray, white, red, green, blue, cyan, yellow and magenta.
• SET MASK
Use the control device to move the dome camera to the area where you want
to set a mask. Press <ENTER> to enter the SET MASK menu. The dome wiII
memorize the present position as a privacy mask position. Up to 24 masks
can be set.
MASK01 MENU
H CENTER
V CENTER
H SIZE
V SIZE
EXIT+SAVE
H CENTER
The original horizontal center of a mask zone is the center of a screen; it is
able to move a mask zone to the other position by adjusting the horizontal
value with the joystick left/right. The camera wiII pan right or left according to
user's control.
OFF
OFF
BLACK
01
01
YES
L/R
D/U
000
000
YES
69