Geutebruck VIPCAM-GNSD882 Installationsanleitung Seite 78

The grey ferrite bead must be applied to the power cable, the black one to the network
cable. Than press them together. Please fix the ferrite beads with cable straps.
The distance between the ferrite beads must be 40 mm at least, because they did not fit
to the straight tube or gooseneck side by side.
Cautions
• Handle the camera carefully
Do not abuse the camera. Avoid striking, shaking, etc. The camera could
be damaged by improper handling or storage.
• Do not disassemble the camera
To prevent electric shock, do not remove screws or covers. There are no
user serviceable parts inside. Ask a qualified service person for
servicing.
• Do not operate the camera beyond the specified temperature, humidity or
power source ratings
Use the camera under conditions where temperature is between -50°C ~
+50°C ( -58°F ~122°F) and humidity is below 90%.
• Do not use strong or abrasive detergents when cleaning the camera body
Use a dry cloth to clean the camera when dirty. In case the dirt is hard to
remove, use a mild detergent and wipe gently.
• Never face the camera towards the sun
Do not aim the camera at bright objects. Whether the camera is in use or
not, never aim it at the sun or other extremely bright objects. Otherwise,
the camera sensor may be smeared or damaged.
2