Geutebruck VIPCAM-GNSD882 Installationsanleitung Seite 77

Preface
The information given in this manual was up to date when published. The company
reserves the right to revise and improve its products. All specifications are subject to
change without notice.
Notice
To work with the Integrated IP
must have the following minimum qualifications:
• A basic knowledge of CCTV
• A basic knowledge of electrical wiring and low-voltage electrical hookups
• Have read this manual completely
Copyright
Under copyright laws, the contents of this user manual may not be copied,
photocopied, translated, reproduced or reduced to any electronic medium or machine-
readable format, in whole or in part, without prior written permission of the company.
Important Information
Before proceeding, please read and observe all instructions and warnings in this
manual. Retain this manual with the original bill of sale for future reference and, if
necessary, warranty service. When unpacking your unit, check for missing or damaged
items. If any item is missing, or if damage is evident, DO NOT INSTALL OR
OPERATE THIS PRODUCT. Contact your dealer for assistance.
Regulation
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Attention please!
We highly recommend, to use network cable with category 6 or higher for network
application of the VIPCAM domes.
Also it is recommended to fullfil the EMC specification. Therefore you must apply ferrite
beads to the network- and system cable nearby the dome connections (see pictures).
High Speed Dome Cameras, any installer or technician
and IP systems and components
1