Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
11. Mounting the Camera
This sports action camera can be mounted in different ways using the included mounting material. Pro-
ceed as follows to ensure proper installation:
Fix camera holder:
14
Mounting options of the camera:
15
a) Mounting the Camera with the Control Rod Holder (15)
• Disengage the screw of the control rod holder (15).
• Attach the holder to the control rod or any other round rod
• Tighten the screw of thee control rod holder again
• Push the camera into the steering rod holder with the holder until you can hear a click
• Ensure that the camera is held tight
• Push both pins of the camera holder together slightly to loosen the holder and pull the camera from
the control rod holder
b) Mounting the Camera with the Helmet Holder (16)
• Push the camera into the helmet holder (16) with the holder until you can hear a click
• Attach one of the included hook-and-loop pads to the bottom of the helmet holder
• Attach the counterpiece to the helmet
• Place the helmet holder on it with an adhesive pad
• Push both pins of the camera holder together slightly to loosen the holder and pull the camera from
the helmet holder
44
• Attach the camera holder (13) to the camera
• Turn the screw into the screw opening with the
• Align the holder straight with the camera.
13
16
(14).
gear until the gear grips and you can hear a
crunch.
17
Werbung
Kapitel
Inhaltsverzeichnis
