Firmware Version; Connection To The Pc Or Laptop; Maintenance And Cleaning; Disposal - Conrad 86 05 59 Bedienungsanleitung

38. Firmware Version

• Press the "MENU" button (3) for approx. 4 seconds.
• Use the buttons "Up" (5) or "Down" (4) to select the menu item System Settings
• Push the button "Confirm" (9).
• Select the buttons "Up" (5) or "Down" (4) in the mode "Version".
• Push the button "Confirm" (9).
• The firmware version currently on the camera is displayed.
• Push the button "Confirm" (9) after selection.
• The display automatically jumps back to setting mode after confirmation.
• Push the button "MENU" (3) to leave the setting mode to get to recording mode.

39. Connection to the PC or Laptop

• Connect the included USB cable between the camera and a free USB port of your computer or lap-
top.
• Push the button "On" (8) and the camera display shows "USB connected".
• The camera is recognised as a mass storage device by your computer or laptop.

40. Maintenance and Cleaning

Only use a clean, lint-free and dry cloth for cleaning the casing, display and lens. Do not use any scouring,
chemical agents or cleaners that contain solvents.

41. Disposal

a) General Information
Dispose of the product according to the applicable statutory provisions at the end of its service
life.
61