Recording Mode - Conrad 86 05 59 Bedienungsanleitung

20. Recording Mode

• Press the "MENU" button (3) for approx. 4 seconds.
• Use the buttons "Up" (5) or "Down" (4) to select the menu item Recording Settings
• Push the button "Confirm" (9).
• Select the buttons "Up" (5) or "Down" (4) in the mode "Recording Mode".
• Push the button "Confirm" (9).
• Use the buttons "Up" (5) or "Down" (4) to select between "Normal recording", "Movement detection",
"Timing record" and "Auto record".
• Push the button "Confirm" (9) to return the camera to the setting mode.
• Push the button "MENU" (3) to leave the setting mode to get to recording mode.
• Select the display "Normal recording" to record a video.
• Select the display "Movement detection" to record a video because of a movement. After approx. 10
seconds, a movement sensor stars the recording. If the camera or environment does not change, the
recording ends after approx. 60 seconds. If the camera or environment move again, the recording
starts again.
• Select the display "Timing Record" to record a specific time previously programmed. Proceed as fol-
lows:
=> After you have selected "Timing Record", push the button "Confirm" (9), push the button "Confirm"
(9) to return to setting mode.
=> Use the buttons "Up" (5) or "Down" (4) to select "Timer Record".
=> Push the button "Confirm" (9).
=> Press the button "down" (4) to get to the next setting.
=> The programmed time set now will light up green.
=> You now may programme 5 different recording times.
=> Select the first recording time with the buttons "Up" (5) or "Down" (4).
=> Push the button "Confirm" (9) and the number of the year lights up red.
=> Use the buttons "Up" (5) or "Down" (4) to select the desired year, then push the button "Confirm"
(9) and the number of the month lights up red.
=> Use the buttons "Up" (5) or "Down" (4) to select the desire month, then push the button "Confirm"
(9) and the number of the month lights up red.
=> Use the buttons "Up" (5) or "Down" (4) to select the desired day, then push the button "Confirm"
(9) and the number of the hours lights up red.
=> Use the buttons "Up" (5) or "Down" (4) to view the clip to select the desired hours, then push the
button "Confirm" (9) and the number of the minutes lights up red.
50