4.2.12.5 Deleting display programs from the display
1) Activate the menu item "Functions ± Delete
Schedule...". The window "Delete Schedule"
appears.
2) Select the unit address from the list "Sign ID"
("00" will select all units).
3) Tick the boxes next to the display programs that
are to be deleted from the display.
4) Click "OK" to confirm your selections, or click
"Cancel" to cancel the procedure.
Once the transmission has been completed, a con-
firmation message will appear.
4.2.12.6 Resetting the display
To delete all the messages, display programs and
settings (except the time setting and the unit
address) the user has saved on the display:
1) Activate the menu item "Functions ± Delete
All...". The window "Delete All" appears.
2) Select the unit address from the list "Sign ID"
("00" will select all units).
3) Click "OK" to confirm your selection, or click
"Cancel" to cancel the procedure.
Once the transmission has been completed, a con-
firmation message will appear.
All rights reserved by MONACOR
be reproduced in any form or by any means for any commercial use.
®
INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may
5 Specifications
Number of LEDs
PML-100COL: . . . . . . . . 840, red / green
PML-100R: . . . . . . . . . . 840, red
PML-70COL: . . . . . . . . . 560, red / green
PML-60R: . . . . . . . . . . . 560, red
Power supply: . . . . . . . . . . 12 V , via power sup-
Dimensions
PML-100R, -100COL: . . 1000 × 110 × 45 mm
PML-70COL, -60R: . . . . 700 × 110 × 45 mm
Weight
PML-100R, -100COL: . . 2 kg
PML-70COL, -60R: . . . . 1.2 kg
Subject to technical modification.
ply unit provided
and connected to
230 V~ / 50 Hz
GB
27