Resetting Special Characters; Displaying Date Or Time, Reproducing An Acoustic Signal; Graphics - IMG STAGE LINE PML-60R Bedienungsanleitung

2) From the list "Char Code", select the character
code for the new character. In the character
map ( fig. 5), the new character will replace
the character that was previously assigned to
the code selected.
3) From the list "Font Size", select the font style for
which the character is to be created.
4) Use the button to add an entry to the list.
5) Click this new list entry. A grid with the size of the
font style selected appears on the right-hand
side of the window.
6) Click the fields of the grid to add or delete pixels.
7) To delete all pixels, click "NO". To adopt the
character, click "Yes". A miniature sample of the
character is now shown next to the list entry.
8) To create the character for another font style,
repeat this procedure from step 3) onwards. To
create another character, repeat this procedure
from step 2) onwards.
9) To delete a list entry, select the appropriate list
entry, click the button  located above the list
and then confirm the confirmation message.
10) To transfer all created special characters to the
display, activate the menu item "Transfer
± Transfer to Sign...". The window "Transfer
Font To Sign" appears.
11) From the list "Sign ID", select the address of the
display (or "00" to select all displays) and then
either click "Transfer" to start the transfer or click
"Cancel" to cancel the procedure.
12) All user-defined special characters can be
saved on the computer via the menu item "File
± Save Font..." and can be loaded via the menu
item "File ± Open Font...".
13) Use the menu item "File ± Quit" to exit the win-
dow "Font Make".

4.2.4.2 Resetting special characters

All user-defined characters may be replaced by the
predefined special characters:
1) Activate the menu item "European ± Recall
Default Font". The window "Confirm" appears.
2) From the list "Sign ID", select the address of the
display (or "00" to select all displays) and then
either click "Yes" to start the transfer or click
"No" to cancel the procedure.
The special characters both in the storage of the
display and in the map "European Char Form" are
reset to the predefined settings (
4.2.5 Displaying date or time, reproducing an
To insert the current time into a text, activate the
menu item "Commands ± Special Function ± Time".
To insert the current date, activate the menu item
"Commands ± Special Function ± Date".
sage is being displayed, activate the menu item
"Commands ± Special Function ± Bell ±"; in the last
menu branch, select the duration of the acoustic
signal: 0.5 to 2 seconds.

4.2.6 Graphics

In addition to text, plain graphics can be displayed.
Users can import graphics or create their own
graphics with the program. Up to 16 graphics can
be loaded into a display:
1) Activate the menu item "Bmp Graphics ± Edit
⑦
2) Select the height and the width for the graphic.
3) To change the size of the view, use the field
4) Click one of the circles beneath "Color" to select
5) Under "Toolbox", the following graphic drawing
fig. 5).
acoustic signal
For an acoustic signal to sound while the mes-
Graphic..." The window
appears ( fig. 7).
Window "Graphic Form"
The maximum graphic size is equal to the size
that can be shown on the display.
beneath "Zoom" (1 × ... 8 ×).
the colour desired. The colour currently se -
lected is shown in the square right above the cir-
cles.
functions are available:
point or freehand line, thin
freehand line, thick
straight line
rectangle
GB
"Graphic Form"
23