System Settings; Setting Date And Time; Changing The Brightness; Changing The Unit Address (Id) - IMG STAGE LINE PML-60R Bedienungsanleitung

2) To add a new display program, click "Add..."
GB
The window "Schedule-Add" appears (
If the user tries to create more than 5 pro-
grams, an error message will appear.
⑩
Window "Schedule-Add"
3) Under "Start Date Time", enter the date and the
time for the start of the display period desired.
Observe the format (month / day / year – each
with two digits) when entering the date.
4) Under "End Date Time", enter the date and the
time for the end of the display period desired.
5) In the field "Page", enter the storage locations of
the messages in the order in which the mes-
sages are to be shown on the display (a ... z or
A ... Z).
6) Click "OK" to confirm your entries. The display
program is now included in the table (
Note: The table does not include the programs of the
display storage; it only includes the programs that have
been created since the PC software was started.
7) If desired, add further display programs
( step 2).
8) To change a display program, select the appro-
priate program from the table and click "Mod-
ify...". In the window "Schedule Modify", change
the data and then click "OK" to confirm your
changes or click "Cancel" to reject them.
9) Select the unit address from the list "Sign ID"
("00" will select all units).
10) Click "Send" to transfer the data to the display.
Programs that already exist in the display stor-
age will be overwritten. Once the transmission
has been completed, a confirmation message
will appear.
26

4.2.12 System settings

fig. 10).

4.2.12.1 Setting date and time

1) Activate the menu item "Functions ± Set Clock...".
The window "Set Clock" appears.
2) Select the unit address from the list "Sign ID"
("00" will select all units).
3) Next to "Date", enter the date, and next to
"Time", enter the time.
4) Click "OK" to confirm your entries, or click "Can-
cel" to cancel the procedure.
Once the transmission has been completed, a con-
firmation message will appear.

4.2.12.2 Changing the brightness

1) Activate the menu item "Functions ± Set Bright-
ness...". The window "Set Brightness" appears.
2) Select the unit address from the list "Sign ID"
("00" will select all units).
3) Select the brightness desired from the list
"Brightness" (100 %, 75 %, 50 %, 25 %).
4) Click "OK" to confirm your entries, or click "Can-
cel" to cancel the procedure.
Once the transmission has been completed, a con-
firmation message will appear.

4.2.12.3 Changing the unit address (ID)

1) Activate the menu item "Functions ± Set ID...".
The window "Set Sign ID" appears.
2) Select the future unit address from the list
"Sign ID" and click "OK" to confirm.
fig. 9).
3) In the confirmation window, click "Yes" to con-
firm your selection, or click "No" to cancel the
procedure.
Once the transmission has been completed, a con-
firmation message will appear.

4.2.12.4 Deleting messages from the display

1) Activate the menu item "Functions ± Delete
Page...". The window "Delete Page" appears.
2) Select the unit address from the list "Sign ID"
("00" will select all units).
3) Tick the boxes next to the storage locations
(page A to page Z) that are to be deleted from

the display.

4) Click "OK" to confirm your selections, or click
"Cancel" to cancel the procedure.
Once the transmission has been completed, a con-
firmation message will appear.