Battery Installation; How To Measure Blood Pressure - Gima 32786 Betriebs- Und Wartungshandbuch

7 ENGLISH

BATTERY INSTALLATION

1. Remove the batteries cover in according with the direction of arrow.
2. Insert 2 "AAA" batteries in accordance with the indication of polarities on the
batteries.
3. Slide the battery cover to close

HOW TO MEASURE BLOOD PRESSURE

1. To start the measurement
Note:In order to get correct measurement results and to avoid unnecessary erroneous
measurement, user should not talk, be seated upright and fasten the cuff securely
around bare skin.
1. Place your elbow on table and turn your palm up. Make sure the cuff is at the same
level as your heart. If you can not keep your arm completely still throughout the reading,
use the package box to support your arm.
2. Press "Page" button, to choose "Memory" zone, there are two memory zones to offer
two persons use.
3. Press " " button again.
4. Start measuring, the cuff will inflate automatically.
5. After detecting Systolic/Diastolic and Pulse values, the measured values will be
displayed on LCD panel.
2. TO see the previous measured values
The main unit automatically stores the previous measured values. (Even after batteries are replaced, the previous values
are stored in 1 minute)
1. Press " " button, then you can recall previous values for the first person's measured value.
2. If you press " " button successively, then you can read next values.
3. Press "PAGE" button,then you can read second person's measured values.
4. Press " " button successively to continue checking second person's values.
5. Stored capacity is up to 60 sets each page.