Inserting The Batteries - Renkforce 1429366 Bedienungsanleitung

8. Inserting the batteries

Open the battery compartment of the measuring dis-
play/thermostat by carefully pushing down the tab at
the battery compartment lid and lifting off the lid. Now
insert the enclosed batteries in the correct polarity.
Observe the symbols in the battery compartment for
this.
Operation of the radio measuring display/
thermostat with batteries is not recommend-
ed because of the lower cell voltage (battery
= 1.5 V, rechargeable battery = 1.2 V) and
the self-discharge of rechargeable batter-
ies.
At battery change, the connection data
(binding) with the radio measuring switching
sockets, as well as programmed time win-
dows, will be retained. The time will have to
be re-programmed, however.
The battery service life is approx. 1 year. A battery change is necessary when the dis-
play grows weaker and blurred. Change the batteries now at the latest, since not only
legibility of the display, but also possibly the radio range/function may be impaired. We
recommend high-quality alkaline batteries as replacement batteries.
24
Figure 1