Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
G Operating instructions
Temperature Controller
Item no.
1391579
Intended use
This product is suitable to switch an electric consumer on or off wirelessly controlled
by temperature using a suitable receiver (not included) of the RS2W radio switch sys-
tem. The electric consumer can also be switched on and off manually.
The temperature controller is powered by two AAA/micro-batteries. The temperature
controller can be toggled between a heating mode and a cooling mode so that either
a heating or a cooling device can be controlled. Switching times can be specified for
an individual day, for all weekdays (Monday - Friday) or for the entire week (Monday -
Sunday) with 8 different switching programmes that work independently of each other.
Please read the operating instructions carefully and do not discard them. If you pass
the product on to a third party, please hand over these operating instructions as well.
Any use other than that described above could lead to damage to this product and
involves the risk of short circuits, fire, electric shock, etc. No part of the product may
be modified or converted! The safety instructions must be observed at all times!
This product complies with the applicable national and European requirements. All
names of companies and products are the trademarks of the respective owners. All
rights reserved.
Package contents
• Temperature controller
• Operating instructions
Up-to-date operating instructions:
1. Open www.conrad.com/downloads in a browser or scan the
displayed QR code.
2. Select document type and language and enter the item num-
ber into the search field. After submitting the query you can
download displayed records.
Explanation of symbols
This symbol indicates specific risks associated with handling, operation or
use.
The "arrow" symbol indicates special tips and operating information.
Safety instructions
Damage due to the failure following these operating instructions will void
the warranty. We do not assume any liability for any resulting damage!
We do not assume any liability for material and personal damage caused
by improper use or non-compliance with the safety instructions. In such
cases, the warranty will be null and void!
• The unauthorised conversion and/or modification of the product is not
permitted for safety and approval reasons (CE).
• The product is not a toy and does not belong in the hands of children.
Position the product so it is out of the reach of children.
• The product may be used in dry, enclosed indoor areas only; it must not
get damp or wet!
• The product must not be exposed to extreme temperatures, direct sunlight
or strong vibrations. Keep the product away from strong magnetic fields
generated by machines, electric motors or loudspeakers.
• Do not operate the device in environments where there are high levels of
dust, flammable gases, vapours or solvents. There is a danger of fire and
explosion!
• Do not use this product in hospitals or medical institutions. Although the
sensor emits only relatively weak radio signals, these may lead to the
malfunction of life-supporting systems. The same may also apply to other
areas.
• Do not leave the packaging material unattended since this may become a
dangerous plaything for children.
• Handle the product with care; it can be damaged by impacts, blows, or
accidental falls, even from a low height.
Notes on batteries/rechargeable batteries
• Batteries/rechargeable batteries must be kept out of the reach of children.
• Do not leave any batteries/rechargeable batteries lying around openly. There is a
risk of batteries being swallowed by children or pets. If swallowed, consult a doctor
immediately.
• Replace flat batteries, rechargeable batteries in time, since flat or old batteries/
rechargeable batteries may leak.
• Leaking or damaged batteries/rechargeable batteries that come in contact with the
skin can cause chemical burns, therefore use suitable protective gloves.
• Liquids leaking from batteries/rechargeable batteries are chemically highly aggres-
sive. Objects or surfaces coming into contact with these liquids may get consider-
ably damaged. Therefore, keep batteries/rechargeable batteries in a suitable loca-
tion.
• Batteries/rechargeable batteries must not be short-circuited, disassembled or
thrown into fire. There is a danger of explosion!
• Do not recharge normal, non-rechargeable batteries; danger of explosion!
• Never mix normal batteries with rechargeable batteries.
• Do not mix batteries/rechargeable batteries with different charges (e.g. flat and
half-discharged batteries).
• Always replace the complete set of batteries/rechargeable batteries.
• Check that the polarity is correct when inserting the batteries/rechargeable batter-
ies (pay attention to plus/+ and minus/-).
It is possible to operate the temperature controller with rechargeable bat-
teries. However, the operating time and the display contrast, are greatly re-
duced due to the lower voltage (battery = 1.5 V, rechargeable battery = 1.2 V).
We therefore recommend to use only high-quality alkaline batteries instead
of rechargeable batteries.
Features and functions
Also consider the chapter "Technical data" at the end of these operating
instructions.
• Operation via two batteries/rechargeable batteries of type AAA/Micro
• Measures and displays temperature and humidity at its location
• Cooling or heating mode can be toggled
• One receiver can be connected
• 8 switching programmes (each can be allocated one individual weekday, the period
"Monday - Friday" or the period "Monday - Sunday")
• Manual operation of the receiver possible
• Receiver is controlled wirelessly (868 MHz technology)
• Positioning on a table or mounting on a wall
Getting started/operation
a) Inserting, replacing batteries
• Open the battery compartment on the back of the temperature controller and in-
sert two batteries of type AAA/micro observing the correct polarity (pay attention to
plus/+ and minus/-).
• All display segments appear briefly, then the digital clock starts and the first meas-
urement value for temperature and humidity is shown on the right in the display.
• Close the battery compartment again.
The battery needs to be replaced when the display contrast is reduced con-
siderably. The programmed data is preserved when the battery is replaced;
you only need to set the time again.
Werbung
Inhaltsverzeichnis
