Herunterladen Inhalt Inhalt Diese Seite drucken

B) Binding Radio Measuring Display/Thermostat To Radio Measuring Switching Socket - Renkforce 1429366 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

b) Binding radio measuring display/thermostat to radio measuring
switching socket
Up to three measuring switching sockets can be bound to one radio measuring dis-
play/thermostat.
Push the button "FUNC" when the radio measuring display/thermostat is ready until
you can see "Meter" in the upper left of the display. Now push the button "+/ON" for
more than three seconds. The symbol for the switching socket starts to flash.
If no further inputs are made below, the device will switch back to the standard display
after approx. 20 seconds.
Now plug a measuring switching socket (item no.
1429367; not enclosed) into a suitable mains socket.
The relay in the switching socket clicks and the right
function display in the programming button lights up.
Now push the programming button at the switching
socket for more than three seconds (see figure 3, item
2). Binding has been successfully completed when the
symbol of the switching socket no longer flashes in the
display. Successful binding is also displayed in that an
"optical" connection is displayed between the icon of
the switching socket and the chosen channel (arrow -
see figure 6).
To bind the two devices, they must be in direct proximity to each other. The place
where this binding takes place should be as free of radio interference sources as pos-
sible. Devices operated on the transmission frequency 866 MHz must be considered
particularly strong interference sources (usually, these are radio headphones, radio-
controlled weather stations, etc.).
The radio range in the free field is approx. 150 metres. This range is clearly shortened
within buildings. However, it is usually still sufficient for safe operation.
The programming button of the measuring switching socket (see figure 3, item 2) can
also be used to switch the switching socket manually on and off by pushing it briefly.
The switching socket is on when the function display is lit.
Figure 5
Figure 6
27

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Rs2w

Inhaltsverzeichnis