Operating Instructions; Cd-Player - Grundig RR 420 CD Bedienungsanleitung

Operating Instructions

Note: This chapter contains excerpts from the operating instructions. For further particulars please refer to the
appropriate user instructions the part number of which is indicated in the relevant spare parts list.
OPEN/
Cassette Control
CLOSE
GB UBS
VOLUME
Function
TAPE
RADIO
CD
R ADIO
M I N MAX
UBS
U LT R A B A S S S Y S T E M
STOP REPEAT
PREVIOUS
PLAY/PAUSE NEXT
PLAYBACK/RECORD A
ONE TOUCH RECORDING
AUTOSTOP
PHONES
ON 6 FM ST 6
BEAT CUT CD Display
Cassette Control CD Control
; PLAY/PAUSE 2;
– to interrupt playback/recording
9 /
– to stop and eject the cassette
STOP 9
Q
– fast forward
MODE
R
– fast rewind
A
– to start cassette playback
0
– to start recording
PREVIOUS/
NEXT
CD PLAYER
Searching for a passage during play
• Hold PREVIOUS down to search backwards to
the beginning.
• Hold NEXT down to search forwards to the end.
Note: This function can be described as "audibly"
searching for a title. During the search, volume is
reduced and returns to its adjusted level as soon as
the button is released.
Selecting a different playback mode
The MODE button allows you to select four different
playback modes. These can only be selected or
changed during playback.
• During playback, press the MODE button until the
display shows the desired function:
REPEAT 1
– REPEAT 1: one track is repeated;
– REPEAT ALL: all tracks are repeated;
– RANDOM: the tracks are played in random
order;
REPEAT
– normal playback.
ALL
• The random function is not possible during
playback of a programme.
RANDOM
• To go back to normal playback, press MODE re-
peatedly until all the mode indications disappear.
• You can also press STOP 9 to stop playback.
CONTROLS
Scale
CD Display
BAND SELECT
TUNING
RANDOM
REPEAT 1
ALL PROG
PROG
160
125
125 160
125
75 125
75
61
61
53 53
The display indicates:
RANDOM: during the RANDOM function
REPEAT 1: repeat one
ALL: repeat all
PROG: programming or programme play-
back
2
: PLAY
;
: PAUSE
88
track number
CD Control
Warning
– to start and interrupt CLASS 1 LASER PRODUCT
playback means that the laser´s
CLASS 1
construction makes it
– to stop playback LASER PRODUCT
inherently safe so that the
– to select a different playback
legally prescribed maximum
mode (RANDOM or REPEAT)
permissible ratiation values can never be exceeded.
and to programme track
CAUTION: Using any equipment or devices other
numbers
than those described and specified in these
operating instructions, or tampering with the unit in
– to skip and search
any way, can result in dangerous exposure to
backward/forward
radiation.
Programming
By programming the player you can play up to 20
tracks in any desired order. If you exceed the
maximum of 20 tracks, the programme function will
start again from the beginning.
Storing a programme
• In STOP mode, press MODE.
The display will show '00' and 'PROG'.
• Select the first desired track using PREVIOUS or
NEXT.
PROG • Store this track by pressing MODE again.
• Select and store in this way all desired titles.
Checking the programme
• In STOP mode, press MODE repeatedly.
– The display shows in sequence all programmed
track numbers. Then, '00' appears again.
• At this point you can also add more tracks to the
programme (up to 20).
CD PLAYER
CD handling
• Use only Digital Audio CDs which have the
symbol .
• To take the CD out of its box easily, press the
2
centre spindle while lifting the CD.
1
• Never write on a CD or attach any sticker to the
CD.
• Always hold the CD at the edge and always
store it in its box after use with the label facing
up.
• To remove dust and dirt, breathe on the CD and
wipe it with a soft, lint-free cloth in a straight line
from the center towards the edge. Cleaning
agents may damage the CD.
• Do not expose the CD to rain, moisture, sand, or
to excessive heat. (E.g. from heating equipment
or in motor cars parked in the sun).
Inserting a CD
• Set the Function switch to CD.
– The ON indicator 6 lights up.
• To open the CD compartment, lift the CD door on
the edge marked OPEN/CLOSE.
• Insert the AUDIO CD, printed side facing up.
• Close the cover.
– The CD-player scans the contents list of the CD.
After that, the total number of tracks appears on
the display.
CD PLAYER
Playing a programme Cassette recording
• Press 9 / to open the cassette holder.
Note: If you press MODE and don't programme any
tracks, CD playback will not start (see
• Insert the cassette.
Troubleshooting).
• When monitoring during
• Press MODE once to show the 'PROG' indication.
recording, adjust the
• Press PLAY/PAUSE 2;.
sound using the controls
VOLUME and UBS.
– Play starts with the first track of the programme.
These controls do not
– The display shows 'PROG 2'
affect the recording.
– After the last track playback stops. The total
• Start recording by pressing 0.
number of tracks will then appear on the display.
(the A button is automatically also pressed).
Note:
– When the end of the tape is reached, the
• Press STOP 9 to stop playback.
recorder buttons are released.
• While playing a programme, it is possible to use
• To interrupt recording, press
PREVIOUS or NEXT to select the desired
• To continue recording, press
programmed tracks.
• Press 9 / if you want to stop recording before
Erasing a programme
the end of the tape.
On pressing again, the cassette holder will
• The programme is erased:
open.
– by opening the CD door;
• The set is switched off if the Function switch is
– if you move the Function selector;
in position TAPE and no buttons are pressed.
– if the batteries are exhausted or if the power
– The ON indicator 6 goes out.
supply is interrupted in another way.
Playing a CD
• Press PLAY/PAUSE 2; to start playback.
– The display shows '2' and the track number.
• Adjust the sound using the VOLUME and UBS
controls.
• For brief interruptions, press PLAY/PAUSE 2;.
– ';' appears on the display.
• To resume playback, press PLAY/PAUSE 2;
again.
• To stop playback, press STOP 9.
– The total number of tracks will then appear on
the display.
– The CD player also goes to position STOP:
– if you open the CD door;
– when the end of the CD is reached;
– if you move the Function selector;
– if the batteries run down or if the power supply
is interrupted.
• To take out the CD, open the CD door by lifting
the edge marked OPEN/CLOSE.
• Open the CD door only if the CD-player is in
position STOP.
Previous / Next
Selecting another track during play
• Press PREVIOUS or NEXT until the required track
number appears in the display.
– The selected track begins to play.
Starting with a particular track
• Press PREVIOUS or NEXT until the required track
number appears in the display.
• Press PLAY/PAUSE 2;.
– Play starts from the selected track.
CASSETTE DECK
Recording from the CD-player
(CD synchro recording)
• Set the Function switch to CD.
• It is not necessary to start the CD player
separately: by pressing 0 the CD player starts
automatically.
– If the CD player is in STOP position, recording
will start from the beginning of the CD (or from
the beginning of the programmed selection).
• To start a recording in the middle of a track,
play the CD in the normal way.
• As soon as the desired passage is reached,
pause the CD and then start recording by
pressing 0.
;
.
;
again.
Recording from the radio
• Set the Function selector to RADIO.
• Select the wave band using the BAND SELECT
switch.
• Tune to desired radio station using the
TUNING control.
• If during the recording of an MW/LW station,
a whistling sound is heard, this sound can be
suppressed by setting the BEAT CUT switch to
another position.