Not Intended Use - SCHUNK TENDO E compact Betriebsanleitung

It can be used for clamping tools either with smooth, cylindrical shanks up to a diameter
of 32 mm or with shanks with reliefs directly and without intermediate sleeves, see chap-
ter Usable shank types [}
The hydraulic expansion toolholder may be used only within range of its technical data.
Do not exceed the maximum specified technical data!
The hydraulic expansion toolholder is intended for industrial use.
Intended use also means that the user has read and understood this operating manual in
its entirety, especially the chapter

Not intended use

2.2
Use of the hydraulic expansion toolholder other than as intended includes for instance:
• Inserting and clamping workpieces or the like.
• Exceeding the specified technical data of the hydraulic expansion toolholder during
use.
23].
Basic safety notes [}
18 – en
17].