Care, Storage And Maintenance - SCHUNK TENDO E compact Betriebsanleitung

Tighten the clamping screw to a dead stop. If the test shaft can be easily removed from
the Hydraulic Expansion Toolholder with two fingers and without any effort, the clamping
force is not high enough.
The Hydraulic Expansion Toolholder should not be inserted anymore.
Send it to SCHUNK for inspection and repair, if necessary.
For questions on service and repairs, contact our technical customer service during our
business hours:
Service-Hotline: +49-7133-103-2840 / Fax: +49-7133-103-942840
6

Care, Storage and Maintenance

• For securing the clamping force, the clamping bore and groove have to be cleaned af-
ter every tool change with a cleaning agent which containing solvents.
• Always stock the Hydraulic Expansion Toolholder in unclamped position and protec-
ted against corrosion.
• Before storage, the whole surface of the Expansion Toolholder should be oiled slight-
ly.
25 – en