Inhaltsverzeichnis
Werbung
THROTTLE CABLE ADJUSTMENT/
SPEED LIMITER ADJUSTMENT
4
3
d
e
a
a
b
1 2
Handlebar side
• Loosen the locknut 3 on throttle cable.
• Turn the adjuster 4 in or out until the
specified free play is obtained.
Turning in d → Free play is increased.
Turning out e → Free play is decreased.
• Tighten the locknut.
WARNING
After adjusting, turn the handlebar to
right and left and make sure that the
engine idling does not run faster.
SPEED LIMITER ADJUSTMENT
The speed limiter keeps the carburetor throttle
from becoming fully-opened even when the
throttle lever is applied to the maximum posi-
tion. Screwing in the adjuster stops the engine
speed from increasing.
1. Measure:
• speed limiter length a
Out of specification → Adjust.
Speed limiter length:
Less than 25 mm (0.98 in)
2. Adjust:
• speed limiter length
Speed limiter adjustment steps:
• Loosen the locknut 1.
• Turn the adjuster 2 in or out until the
specified speed limiter length is obtained.
Turning in a → Speed limiter length is
decreased.
Turning out b → Speed limiter length is
increased.
3 - 5
INSP
ADJ
Werbung
Inhaltsverzeichnis
