Telefunken TRC 850 Bedienungsanleitung Seite 21

Setting the Time of Day
To set the Time of day for normal LCD time display.:
a. Press and hold Setup key until "CODE SETUP" is displayed (takes approximately 2-3 seconds).
b. Release Setup key.
c. Navigate to "SYSTEM SETUP". Press and release OK key. "VOL/MUTE SETUP" is displayed.
d. Navigate to "TIME SETUP". Press and release the OK key.
e. The "ZEIT?" screen is displayed showing current format (12 or 24 hour) flashing and current
time. Use the Up/Down keys to set the format (12Hr or 24Hr) then press and release the
OK key.
f. The "hours" will be flashing. Use the Up/Down keys to set the hours then press and release
the OK key.
g. The "minutes" will be flashing. Use the Up/Down keys to set the minutes then press and
release the OK key.
i. "FERTIG" will be displayed and the remote will remain in Setup, returning to the
"CODE SETUP" screen.
Setting the Date
To set the Month, Date and Day:
a. Press and hold Setup key until "CODE SETUP" is displayed (takes approximately 2-3 seconds).
b. Release Setup key.
c. Navigate to "SYSTEM SETUP". Press and release OK key. "VOL/MUTE SETUP" is displayed.
d. Navigate to "DATE SETUP". Press and release the OK key.
e. The "JAHR?" screen is displayed with the last 2 year digits flashing. Use the Up/Down keys to
set the Year then press and release the OK key.
f. The "MONAT?" screen is displayed with the Month digits flashing. Use the Up/Down keys to
set the Month then press and release the OK key.
g. The "DATUM?" screen is displayed with the Date digits flashing. Use the Up/Down keys to set
the Date then press and release the OK key.
h. The "TAG?" screen is displayed with the Day flashing. Use the Up/Down keys to set the Day
then press and release the OK key.
i. "FERTIG" will be displayed and the remote will remain in Setup, returning to the
"CODE SETUP" screen.
Setting the Backlighting On time
Used for setting the backlight delay following a key action.
a. Press and hold Setup key until "CODE SETUP" is displayed (takes approximately 2-3 seconds).
b. Release Setup key.
c. Navigate to "SYSTEM SETUP". Press and release OK key. "VOL/MUTE SETUP" is displayed.
d. Navigate to "BELEUCHT.SETUP". Press and release the OK key.
e. The "BEL. ZEIT SEK." screen is displayed with the current Backlight On time digits flashing.
Use the Up/Down keys to set the Backlight On time in increments of 5 seconds up to a
maximum of 60 seconds. The default Backlight On time is 10 seconds. To turn the Back-
lighting feature off, set the time to "00" (zero). Press and release the OK key.
f. "FERTIG" will be displayed and the remote will remain in Setup, returning to the
"CODE SETUP" screen.
Reset the LCD Remote to Factory Defaults
To reset the LCD remote back to factory default settings. All User programmed parameters e.g.
code settings, learned commands, etc., are cleared to their respective default settings.
a. Press and hold Setup key until "CODE SETUP" is displayed (takes approximately 2-3 seconds).
b. Release Setup key.
c. Navigate to "SYSTEM SETUP". Press and release OK key. "VOL/MUTE SETUP" is displayed.
d. Navigate to "GERAETE RESET". Press and release the OK key.
e. "BESTAET.RESET" is displayed. Press and release the OK key.
f. "WARTEN..." will be displayed while all parameters are Reset then the remote will exit Setup
and return to normal operation.
21