Telefunken TRC 850 Bedienungsanleitung Seite 18

Programming by Manual Code Search
Facility to manually search the entire Code Library for a particular device that may not be listed in
the Library or listed under a different Manufacturer.
a. Turn on the device to be controlled.
b. Press and hold Setup key until "CODE SETUP" is displayed (takes approximately 2-3 seconds).
c. Release Setup key.
d. Press and release OK key. "CODELISTE AUFR." is displayed.
e. Navigate to "CODE SUCH". Press and release the OK key. "QUELLENTASTE" is displayed.
f. Press and release desired Mode key (TV, VCR, DVD, etc.). "GERAET? TV" is displayed.
g. Using the Up/Down keys, select the Device type to be programmed (TV, VCR, DVD, etc. –
see "GERAET?" note above). Note – For TV Mode, only TV "Device" can be selected. Press
and release the OK key to confirm selection.
h. "FUNKTION TEST" is displayed. Press the Program Up key (or Power or Play (VCR only))
repeatedly until the Device to be controlled changes channel, turns off or responds
accordingly. "SUCHEN" will be displayed (along with the Device selection) during the search
process. If the required Code is accidentally passed then press the Channel Down key to
backtrack through the Library. Press Channel Up (or Power or Play) to change direction
forward again. Press and release OK key to install the Code.
i. "FERTIG" will be displayed and the remote will exit Setup and return to normal operation.
When all codes have been searched "SUCHE ENDE" will be
displayed and remote returns to normal operation.
Programming by search for Brand names
Facility to manually search specific Brands within the Code Library for a particular manufacturer.
a. Turn on the device to be controlled.
b. Press and hold Setup key until "CODE SETUP" is displayed (takes approximately 2-3 seconds).
c. Release Setup key.
d. Press and release OK key. "CODELISTE AUFR." is displayed.
e. Navigate to "HERSTEL.-CODES". Press and release the OK key. "QUELLENTASTE" is
displayed.
f. Press and release desired Mode key (TV, VCR, DVD, etc.). "GERAET? TV" is displayed.
g. Using the Up/Down keys, select the Device type to be programmed (TV, VCR, DVD, etc. – see
"GERAET?" note above). Note – For TV Mode, only TV "Device" can be selected. Press and
release the OK key to confirm selection.
"HERSTEL.-CODE" is now displayed. Press and release the numeric key (0-6) corresponding
to desired Manufacturer
1. Philips
2. Sony, Panasonic, JVC, Toshiba
3. Thomson
4. Telefunken
5. Grundig
6. Nokia
0. Alle anderen Marken für diese Gerätegruppe).
h. "FUNKTION TEST" is displayed. Press the Program Up key (or Power or Play (VCR only))
repeatedly until the Device to be controlled changes channel, turns off or responds
accordingly. "SUCHEN" will be displayed (along with the Device selection) during the search
process. If the required Code is accidentally passed then press the Channel Down key to
backtrack through the Library. Press Channel Up (or Power or Play) to change direction
forward again. Press and release OK key to install the Code.
i. "FERTIG" will be displayed and the remote will exit Setup and return to normal operation.
18
Suche
Set
EnDe