Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Code Identification
Press the respective Mode key in normal operation to display
programmed code for that Mode (e.g. "DVD Code 0768").
Programming Combo Device Codes
Some Combo devices (e.g. TV/VCR, TV/DVD, DVD/VCR, etc) will require you to set up two
different Mode keys to control both parts of the Combo device. For example, if you have a
TV/DVD Combo, you might need to set up one code under the TV key to control the TV part
AND a separate code (under any other Mode key) to control the DVD part.
Controlling Combo Devices
Some Combo devices (e.g. TV/VCR, TV/DVD, DVD/VCR, etc) have separate keys on the original
remote to select the part of the Combo device to be controlled. For example, if your Combo
device is a DVD/VCR then its original remote may have separate DVD and VCR keys for selection
of the Combo part you would control. The equivalent key functions can be found on your remote
by using the Mode and Setup keys. Assuming the DVD/VCR Combo device is the example and its
code is programmed under DVD Mode, press and hold the DVD Mode key for more than one
second to send the DVD key command. To send the VCR key command, quickly press and
release the Setup key followed by pressing and releasing the DVD Mode key. This method can be
applied similarly to all Combo devices (e.g. TV/VCR, TV/DVD, DVD/VCR, etc) and is available for
all Modes. This feature is not supported by all codes.
System Setup Options: Pressing OK key at SYSTEM SETUP accesses the System Setup
Options for Volume Punch-Through control Setup, Time Setup, Date Setup, Backlight Setup and
System Reset.
System-
Vol/Mute
Set
Setup
Setup
Zeit-
Setup
Datums-
Setup
Beleucht.
Setup
Geraete-
Reset
Volume/Mute Control and Punch-Through Feature
This remote allows you to select which Mode controls your Volume/Mute keys. The remote is
initially set (factory default) for all Modes programmed with "Visual" codes (e.g. TV, VCR, DVD,
PVR, SAT & CABLE) and "Audio" codes (e.g. CD & AUDIO) to use their own Volume/Mute control
if present. If the programmed "Visual" code has no Volume/Mute operation of its own then those
keys will punch-through control to the TV Mode device without needing to change to TV Mode.
Any Mode chosen for Volume/Mute control MUST have its own Volume/Mute function either in the
programmed code or learned otherwise the Volume/Mute keys will do nothing.
Vol/Mute
Welcher
Set
Set
alle
Mod.?
Vol/Mute
Welcher
Set
Einz.
Mod.?
Vol/Mute
BeStaet.
Set
Reset
Reset
Zeit?
Fertig
Set
Set
24HR 23;58
Jahr?
Monat?
Set
Set
2009
Bel.-Zeit
Fertig
Set
Set
Sek.
20
Bestaet.
Warten..
Set
Set
Reset
Warten..
Fertig
Set
Set
Warten..
Fertig
Set
Set
Warten..
Fertig
Set
Set
Set
Datum?
Tag?
Set
Set
10
9
Mo
Set
Set
DVD
CoDe 0768
Set
Set
Set
Fertig
Set
Set
19
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
Fehlerbehebung
