GRAUPNER RMS TITANIC Betriebsanleitung Seite 14

Foreword
Thank you for choosing to purchase the Graupner/SJ model „RMS TITANIC", order no. 2104. Graupner/SJ
models stand for high quality. We pay great attention to stability at the key points in series production. Due
to extensive prefabrication, including motor and rudder system, as well as the high degree of detail made
possible by CNC processing, this model very closely replicates the original.
It is quite important that these instructions are read completely prior to assembly and first-time use
of the model. The safety rules stated in these instructions must be followed during trial runs as well
as initial use and thereafter.
Model summary description
This boat is a member of the GRAUPNER/SJ PREMIUM line, a series of particularly high-quality ready-made
models with an unprecedented level of detailing.
The core of this high-quality model is the robust moulded GRP hull, complemented by the superstructure
and deck which are constructed from laser-cut ABS parts. Many of the small items are of metal, and almost
everything is factory-assembled. The hull, parts of the superstructure, the masts and fittings are spray-
finished using semi-matt paints, and the decals are already applied. The many details and scale fittings give
the boat an impressive scale appearance.
The ample deck openings make it a simple matter to install the RC components, and the procedure is quickly
completed. To prepare the boat for running all you have to do is install the RC components and the drive
battery, carry out a little soldering, and the model is ready for the water.
Specification
Overall length approx.
Beam approx.
Overall height approx.
All-up weight
Scale approx.
Manufacturer's declaration from Graupner/SJ GmbH
Contents of the manufacturer's declaration:
If material defects or manufacturing faults should arise in a product distributed by us in the Federal Republic
of Germany and purchased by a consumer (§ 13 BGB), we, Graupner/SJ GmbH D-73230 Kirchheim/Teck,
Germany, acknowledge the obligation to correct those defects within the limitations described below.
The consumer is not entitled to exploit this manufacturer's declaration if the failure in the usability of the
product is due to natural wear, use under competition conditions, incompetent or improper use (including
incorrect installation) or external influences.
This manufacturer's declaration does not affect the consumer's legal or contractual rights regarding defects
arising from the purchase contract between the consumer and the vendor (dealer).
Extent of the guarantee
If a claim is made under guarantee, we undertake at our discretion to repair or replace the defective goods. We will not
consider supplementary claims, especially for reimbursement of costs relating to the defect (e.g. installation / removal costs)
and compensation for consequent damages unless they are allowed by statute. This does not affect claims based on legal
regulations, especially according to product liability law.
Guarantee requirements
The purchaser is required to make the guarantee claim in writing, and must enclose original proof of purchase (e.g. invoice,
receipt, delivery note) and this guarantee card. He must send the defective goods to us at his own cost, using the following
address:
14
1760 mm
210 mm
490 mm
7,2 kg
1: 150
Fa. Graupner/SJ GmbH, Serviceabteilung,
Henriettenstr.96, D 73230 Kirchheim/Teck
Graupner/SJ RMS TITANIC