Wearing the Watch
Cautions for Water-Resistance
Your watch has undergone testing in a controlled environment and is
proven to be water and dust-resistant in certain circumstances (meets
the requirements of classification IP67 as described by the international
standard IEC 60529 - Degrees of Protection provided by Enclosures [IP
Code]; test conditions: 15° C/59° F ~ 35° C/95° F, 86 - 106 kPa, 1 meter
(approximately 3 feet), for 30 minutes). Despite this classification, your
device is not fully resistant to water damage.
The watch must not be immersed in water deeper than 3 feet
•
(approximately 1 meter) and kept submerged for longer than 30
minutes.
The device must not be exposed to water at high pressure, such as
•
ocean waves or a waterfall.
Should your watch or your hands become wet, dry them thoroughly
•
before handling the device.
The device must not be exposed to salt water, ionized water or
•
soapy water.
The watch's water and dust-resistant features may be damaged by
•
dropping or receiving an impact.
If the watch gets wet, use a clean, soft cloth to dry it thoroughly.
•
The touch screen and other features may not work properly if the
•
device is used in water or any other liquid.
If the watch has been immersed in water or if the microphone or
•
speaker has gotten wet, in-call sound quality may be affected. Wipe
the microphone or speaker with a dry cloth to ensure it is clean and
dry.
Basic
26