Programming The Transmitter - Becker Centronic EasyControl EC142-II Montage- Und Betriebsanleitung

Assembly and Operating Instructions
1) Programming the master transmitter
Note
Follow the Assembly and Operating Instructions for the receiver.
The master transmitter is the very first transmitter programmed on a receiver.
In contrast to subsequently programmed transmitters, the master transmit-
ter enables, among other things, the setting of limit positions (for drives with
integr. radio receiver) and the programming or deleting of further transmit-
ters. Any transmitter which has a separate UP, STOP, DOWN button and a
programming button can be a master transmitter.
Operate the programming button on the transmitter using a suitable
cylindrical tool (e.g., ballpoint pen).
28

Programming the transmitter