Programming The Transmitter - Becker Centronic EasyControl EC141-II Montage & Betriebsanleitung

1) Programming the master transmitter
a) Readying the receiver for programming
The master transmitter refers to the very first transmitter pro-
grammed in a receiver. In contrast to subsequently programmed
transmitters, the master transmitter enables, among other things,
the setting of limit positions and the programming or deleting of
further transmitters. Any transmitter that has separate UP, STOP,
DOWN buttons and a programming button can be a master trans-
mitter.
Follow the Assembly and Operating Instructions for the receiver.
Operate the programming button on the transmitter using a suit-
able cylindrical tool (e.g. a ballpoint pen).
• Switch off the power supply to the receiver for 5 seconds, then switch it back on
or

Programming the transmitter

27 - en