Operating Determinations - EuroLite STW-300A Bedienungsanleitung

Vor dem Aus- und Einfahren der Teleskoprohre muss immer ein Sicherheitsbereich um das Stativ herum
abgesperrt werden. Dieser Sicherheitsbereich muss einen Durchmesser haben, der der 1,5fachen
maximalen Auszugshöhe entspricht.
Ausgefahrene Teleskoprohre müssen immer mit einer zweiten Sicherung gesichert werden!
Alle an einem Stativ angebrachten Geräte, Lichteffekte und Traversen müssen zusätzlich mit einer zweiten
Sicherung versehen werden.
Das Stativ ist vor der Benutzung auf evtl. Beschädigungen zu prüfen.
Bei Beschädigungen an einem Stativteil darf das Stativ nicht mehr eingesetzt werden.
Kinder und Laien vom Gerät fern halten!

OPERATING DETERMINATIONS

This device is a lighting stand for installing e.g. spots or lighting effects. The carrying capacity of the stand
must not exceed 35 kg.
This device is designed for professional use, e.g. on stages, in discotheques, theatres etc.
Stands with their loads have to be secured against unintended movements.
When choosing the installation-spot, please make sure that the stand has to be installed in a way that no
person can enter the area below the stand or its load! Make sure that the respective area is blocked.
An unintended movement of the load has to be avoided.
Stands have to be operated by instructed persons. The different local conditions have to be considered in
terms of safety rules.
The installer is responsible for adhering to the carrying capacity given by the manufacturer, the safety
requirements and the qualification of possible co-workers.
When people are located below the load, all necessary safety measures have to be taken in order to avoid
injury.
The personell has to be instructed on the content of the user manual and on the dangers related with
operating stands.
Dependending upon the individual installation spot, all necessary measures against movement and for
securing the standing safety have to be created.
The installation is only allowed on carrying areas. In some cases, an appropriate substructure, e.g. via an
balancing foot, has to be created.
When choosing the installation material, optimum dimensions have to be chosen in order to secure
maximum safety.
Never install any objects offering a large surface for winds (e.g. banners, signs, etc.).
The loads have to be installed in a balanced way.
Always fix the fixtures with an appropriate safety-rope.
Operate the device only after having become familiar with its functions. Do not permit operation by persons
not qualified for operating the device. Most damages are the result of unprofessional operation!
The stand must never be moved before having lowered all telescopic tubes!
10/14 60000840_V_1_2.DOC