Introduction; Intended Use; Features; Package Contents - Parkside PPS 200 A1 Originalbetriebsanleitung

POWER SANDER PPS 200 A1

Introduction

Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.

Intended use

This appliance is intended for the dry sanding of
wood, metal and paintwork. Any other uses of the
appliance are considered improper and carry the
risk of serious personal injury. The manufacturer
accepts no responsibility for damage(s) attribut-
able to misuse. This appliance is not intended for
commercial use.

Features

Grip
Release button
Dust collector
Nozzle (suction)
Adapter for external vacuum extraction
Sanding plate (rectangular)
Sanding sheet
Sanding plate (triangle bottom)
Sanding plate (triangle top)
ON/OFF switch
■ 34 GB│MT
│

Package contents

1 Power sander PPS 200 A1
3 Sanding sheets (120 grain)
1 dust collector
1 adapter for external vacuum extraction
1 set of operating instructions

Technical data

Nominal voltage:
Nominal power input: 200 W
Nominal speed:
Nominal
oscillation speed:
Sanding sheet
dimensions:
Protection class:
Noise and vibration data:
Noise measurement value determined in accordance
with EN 60745. The A-rated noise level of the
power tool is typically as follows:
Sound pressure level L
PA
Sound power level L
WA
Uncertainty K:
Wear hearing protection!
Vibration values (vector total of three directions)
determined in accordance with EN 60745:
Vibration emission value a
Uncertainty K = 1.5 m/s
NOTE
► The vibration level specified in these instruc-
tions has been measured in accordance
with the standardised measuring procedure
specified in EN 60745 and can be used to
make equipment comparisons. The specified
vibration emission value can also be used to
make an initial exposure estimate.
230 V ∼ 50 Hz
(AC)
n 14000 rpm
0
n 28000 rpm
0
rectangular
114 x 102 mm
Triangle
93 x 93 x 93 mm
II / (Double insulation)
: 78,5 dB (A)
: 89,5 dB (A)
3 dB
= 5,71 m/s 2
h
2
PPS 200 A1